Horizontal spindle alignment. A spindle with a pulley is attached via a drive band to a drive wheel. The spindle is at about 9 on a clock face; the drive wheel is at about 3.
Most Recent Issue and Supplement
-
• A Tabletop Spinning Wheel
• Restoring a Little Spinning Wheel
• Painted Reel With a Clicker and a Clock
• Inquiry: A Wheel Marked RT 1847
• Errata: Maine Wheel Makers -
Hand Loom Supplement #22 – October 2020
• The Loom Built by Lars Hokanson
• Devereux Mansion Looms Revisited
• Barbour Linen Loom
• School Desk Loom
• The Loom Manual Library of Janet Meany
See all Issues or Supplements